Celestion TF1530e Woofer, 15" Low frequency, 400/800W, 98 dB, 40Hz-3000Hz

mağazada STOK YOK. teklif isteyin. 1-3 günde teslim edebiliriz
Hızlı Gönderi

Specifications

400W
Nominal Power Rating
98dB
Sensitivity
3in
Voice coil diameter
Nominal Diameter
381mm/15in
Nominal Power Rating
400W
Continuous Power Rating
800W
Sensitivity
98dB
Rated Impedance
Frequency Range
40Hz-3000Hz
Voice coil diameter (mm)
75mm
Voice coil diameter (in)
3in
Chassis Type
Pressed Steel
Magnet Type
Ferrite
Magnet Weight
2.44kg/86oz
Voice coil material
Edgewound copper clad aluminium
Former Material
Glass Fibre
Cone material
Kevlar loaded paper
Surround Material
Cloth-sealed
Suspension
Single
Xmax
4.5mm/0.18in
Gap Depth
8mm/0.31in
Voice coil winding width
17mm/0.67in


Small Signal Parameters

Sd
855.30cm2/132.57in2
Fs
43.60Hz
Mms
71.94g/2.54oz
Qms
2.757
Qes
0.373
Qts
0.328
Re
5.48Ω
Vas
191.62L/6.77ft3
BI
17.03Tm
Cms
0.19mm/N
Rms
7.15kg/s
Le (at 1kHz)
0.79mH

Mounting Information

Mounting slot dimensions
9.4mm x 6.2mm/0.37in x 0.24in Ø
Mounting slot PCD
369mm/14.57in
Number of mounting slots
8
Overall Depth
161mm/6.34in
Overall Diameter (mm)
385mm
Overall Diameter (in)
15.16in
Cut-out diameter
352mm/13.86in
Unit Weight
6.5kg/14.3lb

Packed Dimensions & Weight

Single pack size W x D x H
410mm x 410mm x 180mm/16.1in x 16.1in x 7.1in
Single pack weight
6.8kg/15.0lb
Multi Pack Qty
45
Multi pack size W x D x H
1200mm x 1000mm x 980mm/47.2in x 39.4in x 38.6in
Multi pack weight
325kg/715lb

Frequency Response and Impedance Curves

Frequency Response and Impedance Curves

Topmost curve: Frequency response on axis | Secondary curve: Frequency response at 45° off axis

Power Rating: Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.

Continuous Power Rating is defined as 3dB greater than the AES rating.

Sensitivity measured on axis at 1W, 1m in 2Π anechoic environment.

Xmax is derived from: (voice coil winding width-gap depth)/2.

Small Signal Parameters are measured after unit subjected to pre-conditioning signal.
Tamamlayıcı vs Benzer Ürünler
{x} kişi bu ürünü inceliyor.
Yükleniyor...