| A/D Conversion | 24 Bit linear, Sigma-Delta, 128 times oversampling |
| Amplifier Gain | 39, 35, or 32 dB Switchable |
| Analog Inputs | Yes |
| CAN Bus Interface | 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω | 2000 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω | 1450 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω | 850 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 1200 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 600 Watts |
| Control Protocol | CAN-Bus (with RCM 26 module) |
| D/A Conversion | 24 Bit, Sigma-Delta, 128 times over-sampling |
| Data Format | 24 Bit linear A/D and D/A conversion, 48 Bit processing |
| Digital Inputs | Optional with RCM-26 |
| DIM 30 | 0.02 % |
| Electronics Type | Amplifier |
| FIR-Drive | Optional with RCM-26 |
| GPIO Control Ports | 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) |
| Impedance | 2/4/8 Ω |
| Input Impedance (Balanced) | 20 kΩ |
| Input Sensitivity | 0 dBu / +6 dBu / +7 dBu Selectable |
| Intermodulation Distortion (SMPTE) | 0.05 % |
| Internal Processing | 2 DSPs (150 MHz, 300 MIPS) |
| Maximum Bridged Output 4Ω | 3800 Watts |
| Maximum Bridged Output 8Ω | 2900 Watts |
| Network Control (IRIS-Net) | Optional with RCM-26 |
| Power Consumption | 1000 W |
| Power Supply | 100 - 240V, 50 - 60 Hz |
| Sample Rate | 48 kHz |
| Sample Rate Conversion (SRC) | 32 kHz - 192 kHz, internal Sample-Rate- Converter |
| Signal-to-Noise Ratio (A-weighted) | 109 dB |
| Slew Rate | 30 V/µs |
| Topology | Class-H grounded bridge |
| Total Harmonic Distortion | 0.05 % |
| Height | 2RU 88.1 mm (3.47") |
| Width | 482.6 mm (19") |
| Depth | 512 mm (20.16") |
| Weight Net | 14.2 kg (31.31 lbs) |
