Electro Voice PA2400T Installation Power Amfi, 2X400W/100V

Stok durumu veya tedarik süresini sorunuz: 0 (533) 592 49 10
Hızlı Gönderi
  • Efficient performance for low impedance or distributed systems
  • Ideal for sound reinforcement, paging, and life safety
  • 400 W per channel for 4 Ω or 70/100 V lines
  • Bridged mono out for 860 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

 

Amplifier Gain34 dB
Continuous Rated Power (1 kHz, THD 1%) 100v430 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω430 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v430 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω215 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v400 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω400 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v400 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω200 Watts
Crosstalk< < -75 dB
DIM 30< 0.1 %
Frequency Response65Hz - 40kHz -1dB, ref. 1kHz
Impedance4/8 Ω 70V/100V
Input Impedance (Balanced)> 20 kΩ
Input Sensitivity0 dBu (775mV) @ rated output power or voltage, 1kHz
Intermodulation Distortion (SMPTE)< 0.1 %
Network Control (IRIS-Net)No
Number of Channels2
Rated output power (*rated load) THD< 0.2%, 20Hz – 20kHz400/200 W 70V/100V-400
Rated output power (*rated load) THD< 1%, 1kHz430/215 W 70V/100V-430
Signal-to-Noise Ratio (A-weighted)103 dB
Slew Rate25 V/µs 70V-46, 100V-65
Total Harmonic Distortion< 0.1 %
Height2RU 88 mm (3.46")
Width483 mm (19.02")
Depth406 mm (15.98")
Weight Net26 kg (57.32 lbs)

 

Tamamlayıcı vs Benzer Ürünler
{x} kişi bu ürünü inceliyor.
Yükleniyor...