Electro Voice P1200Rt Remote Power Amfi, 2X590W/100V-70V

Stok durumu veya tedarik süresini sorunuz: 0 (533) 592 49 10

Hızlı Gönderi

Performance and control for fixed installation
590 W per channel into 70/100 V line
Class-AB design
IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module
Eight recallable DSP/configuration presets
System check button for fast, complete test of all connected cables and loudspeaker components
Two GPI and two GPO ports
Parallel RJ-45 CAN bus connectors
Pilot tone detection for cable supervision

Connector Type	Barrier strip
Continuous Rated Power (1 kHz, THD 1%) 100v	590 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v	580 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 100v	500 Watts
Continuous Rated Power (20-20 kHz,THD<0,2%) 70v	500 Watts
Control Protocol	CAN-Bus
Controls	2 x 0 V, 5V free configurable, Easy-Remote
Cooling	Front-to-rear, three 4-stage fans
DIM 30	< 0.2/< 0.3 % 100V/70V
FIR-Drive	No
Frequency Response	45 - 20,000 Hz -1 dB
Input Impedance (Balanced)	20 kΩ XLR Input
Input Sensitivity	1.55 V (+6dBu)
Intermodulation Distortion (SMPTE)	< 0.1/< 0.3 % 100V/70V
Maximum Input Voltage	8.7 V +21 dBu
Network Control (IRIS-Net)	Yes
Serial Interface	Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Signal-to-Noise Ratio (A-weighted)	106 dB
Topology	Class-AB
Total Harmonic Distortion	< 0.1/< 0.2 % 100V/70V
Height	3RU 132.5 mm (5.22")
Width	483 mm (19.02")
Depth	390 mm (15.35")
Weight Net	25 kg (55.12 lbs)