Shure GLXD24E/Beta58A
The GLXD24/Beta58A Handheld Wireless System from Shure includes a GLXD4 wireless receiver and a GLXD2 handheld transmitter with a Beta 58A microphone element. The system operates on the 2.4GHz ISM band in the Z2 frequency band between 2400 and 2483.5MHz.
Both the GLXD2 transmitter and the GLXD4 receiver feature Shure s LINKFREQ automatic frequency management that allows them to scan for the clearest frequency available and automatically link to each other without any setup required from you besides turning both units on. With their continuous interference monitoring, both the transmitter and receiver automatically switch to the clearest frequencies available to avoid interference and dropouts.
GLXD4 Receiver : Z2 (2400 / 2483,5 Mhz)
- 2.4 GHz ISM Band
- Z2 Frequency Band
- For Use with GLX-D Wireless Systems
- LINKFREQ Automatic Frequency Management
- Integrated Battery Charge Port
- Continuous Interference Monitoring
- Front-Panel LCD Screen
- Use up to 8 Systems Simultaneously
Outputs | 1x XLR Output 1x 1/4" (6.35 mm) Output |
Output Impedance | XLR: 100 Ω 1/4": 100 Ω, 50 Ω unbalanced |
Maximum Audio Output Level Analog | XLR: 1 dBV (into 600 Ω load) 1/4": 8.5 dBV (into 3 kΩ load) |
Tuning Frequency Range | 2400 to 2483.5 MHz |
Range of Operation | 200 (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
Transmit Mode | Frequency Hopping |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | 120 dB, A-weighted |
RF Sensitivity | -88 dBm, typical |
Total Harmonic Distortion | 0.2%, typical |
RF Output | 10 mW E.I.R.P., maximum |
Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
Pin Configuration | XLR: 1= ground, 2= hot, 3=cold 1/4": Tip= audio, ring= no audio, sleeve= ground |
Antenna | Impedance: 50 Ω Type: 1/2 wave sleeve dipole, non-removable Max Input Level: -20 dBm |
Power Requirements | 14 to 18 V DC (tip positive with respect to ring), 550 mA |
Spurious Rejection | >35 dB, typical |
Gain Adjustment Range | -20 to 40 dB in 1 dB steps |
Phantom Power Protection | Yes |
Housing | Molded plastic |
Dimensions (HxWxD) | 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm) |
Weight | 10.1 oz (286 g) |
GLXD2 Transmitter
|
RF Power Output | 10 mW E.I.R.P, maximum |
Maximum Input Level | 147 dB SPL |
Power Requirement | 3.7 V Rechargeable Li-Ion |
Battery Life | Up to 16 hours |
Operating Range | Indoors: Up to 100 (30 m) typical, with a maximum of 200 (60m) Outdoors: Up to 65 (20 m) typical, with a maximum of 165 (50 m) |
Housing | Molded plastic |
Dimensions | Body Length: 9.9" (252 mm) Body Width: 1.5" (37 mm) Capsule Width: 2" (51 mm) |
Weight | 7.8 oz (221 g), without batteries |
|
Type | Dynamic (Moving Coil) |
Frequency Response | 50 Hz to 16 kHz |
Polar Pattern | Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency |
Output Level | Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL |