Martin Rush Mh 4 Beam

Martin Rush MH-4 Beam Moving Head Spot

This compact beam moving head for smaller venues blasts an intense and narrow beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, 6-facet prism and focus.

• Powerful beam moving head
• Sharp, narrow long-throw beam
• Powerful mid-air effects
• Fixed gobo wheel
• Color wheel
• Mechanical dimming and strobe
• 6-facet prism
• Motorized focus
• 3 & 5 pin XLR

RUSH MH 4 Beam Specifications:

• Physical:
  • Length: 12.6 in. (319 mm)
  • Width: 10.0 in. (255 mm)
  • Height: 18.9 in. (481 mm)
  • Weight: 30.9 lbs. (14 kg)
• Lamp:
  • Approved lamp: Philips MSD Platinum 2R
  • Color temperature: 9000 K
  • CRI (Color rendering index): 75
  • Average lifetime: 2000 hours
• Dynamic Effects:
  • Color wheel: 14 colors plus open, continuous and stepped scrolling, rotation with variable direction and speed
  • Static gobo wheel: 17 gobos plus open, continuous and stepped scrolling, rotation with variable direction and speed
  • Shutter: Strobe effect, pulse effects, instant open and blackout
  • Prism: 6-facet, indexing and rotation with variable direction and speed
  • Focus: Motorized
  • Dimmer: 0 - 100% continuous dimming
  • Pan: 540°
  • Tilt: 270°
• Control and Programming:
  • Control system: DMX
  • DMX channels: 13
  • Setting and addressing: Control panel with LCD display
  • DMX compliance: USITT DMX512/1990
  • 16-bit control: Dimming, pan and tilt
  • Pan and tilt speed: Adjustable via onboard control panel and DMX
  • Position correction system: Available for pan and tilt
• Optics:
  • Beam angle: 3°
• Construction:
  • Color: Black
  • Housing: High-impact flame-retardant thermoplastic
  • Protection rating: IP20
• Installation:
  • Minimum distance to illuminated surfaces: 21.3 ft. (6.5 m)
  • Mounting points: Two quarter-turn brackets for rigging clamps
  • Location: Indoor use only, must be fastened to surface or structure
  • Orientation: Any
• Connections:
  • AC power input: Neutrik PowerCon
  • DMX data in/out: 3-pin and 5-pin locking XLR
• Electrical:
  • AC power: 100-240 V nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch-mode
• Typical Power and Current:
  • 110 V, 60 Hz: 2.2 A, 234 W, PF 0.996
  • 230 V, 50 Hz: 1.1 A, 231 W, PF 0.996
    Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
• Thermal:
  • Cooling: Forced air (temperature-regulated, low noise)
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 0° C (32° F)
  • Total heat dissipation (calculated, +/- 10%): 800 BTU/hr.
• Approvals:
  • EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
  • US safety (pending): UL 1573
  • US EMC: FCC Part 15 Class A
  • Canadian safety (pending): CSA C22.2 No. 166
  • Canadian EMC: ICES-003 Class A
  • Australia/NZ: C-TICK N4241