Performance | |
---|---|
Sample Rate | 32 kHz |
Frequency Response | 125 Hz - 15 kHz |
Distortion | <0.1% @ 1.0 kHz |
Gain | Bypass Mode: 0 dB line in, 24 / 36 / 48 dB mic in Active Mode: 0 dB line in, 24 / 36 / 48 dB mic in |
Signal-to-Noise Ratio | >90 dB |
Signal Delay | <11 ms |
Decorrelator | Frequency Shift 5 Hz Up / Masked Noise |
Connectors | |
---|---|
Mic/Line Input | Connectors: 3-pin XLR balanced / 5-pin DIN balanced Max level: 18 / 6 / -6 dBV line in Max level: -18 / -30 / -42 dBV mic in Impedance: 10 kohm / 2 kohm (line / mic) CMRR: >25 dB (50 Hz to 20 kHz) Phantom Power: 16 V (mic only, switchable) Priority Control: loop through of pin 4 & 5 of DIN |
Mic Input | Connectors: 3-pin XLR balanced / 5-pin DIN balanced Max level: -18 / -30 / -42 dBV mic in Impedance 2 kohm Phantom Power: 16 V (switchable) Priority Control: loop through of pin 4 & 5 of DIN |
Line Input | Connector: Cinch (unbalanced) Max Input Level: 18 / 6 / -6 dBV Impedance: 20 kohm |
Line Output | Connector: 3-pin XLR (balanced) Max Level: 18 / 6 / -6 dBV (line in) Max Level: 6 dBV (mic in) Impedance: <100 ohm |
Line Output | Connector: Cinch (unbalanced) Max Level: 18 / 6 / -6 dBV (line in) Max Level: 6 dBV (mic in) Impedance: <100 ohm |
Mic Output | Connector: 5-pin DIN (balanced) Max Level: 22 / -34 / -46 dBV (line in) Max Level: 34 dBV (mic in) Impedance: <100 ohm Priority Control: loop-through of pins 4 and 5 of DIN from inputs |
General | |
---|---|
Certifications | Europe: CE / Declaration of Conformity Safety: acc. to EN 60065 Immunity: acc. to EN 55103-2 Emission: acc. to EN 55103-1 |
Mounting | Stand-Alone 19" (48.3 cm) Rack / 1U High |
Color | Charcoal |
Operating Temperature | 14 to 131°F (−10 to 55°C) |
Storage Temperature | −40 to 158°F (−40 to 70°C) |
Relative Humidity | <95% |
Power Requirements | 115/230 VAC (±10%, 50/60 Hz) |
Inrush Current | 3.0 A @ 115 VAC 1.5 A @ 230 VAC |
Power Consumption | 50 VA (max) |
Dimensions (HxWxD) | 2.2 x 16.9 x 10.6" (5.6 x 43.0 x 27.0 cm) |
Weight | 6.6 lb (3.0 kg) |