A/D Conversion | 24 Bit linear, Sigma-Delta, 128 times oversampling |
Amplifier Gain | 39, 35, or 32 dB Switchable |
Analog Inputs | Yes |
CAN Bus Interface | 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) |
Continuous Rated Power (1 kHz, THD 1%) 2Ω | 2000 Watts |
Continuous Rated Power (1 kHz, THD 1%) 4Ω | 1450 Watts |
Continuous Rated Power (1 kHz, THD 1%) 8Ω | 850 Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω | 1200 Watts |
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω | 600 Watts |
Control Protocol | CAN-Bus (with RCM 26 module) |
D/A Conversion | 24 Bit, Sigma-Delta, 128 times over-sampling |
Data Format | 24 Bit linear A/D and D/A conversion, 48 Bit processing |
Digital Inputs | Optional with RCM-26 |
DIM 30 | 0.02 % |
Electronics Type | Amplifier |
FIR-Drive | Optional with RCM-26 |
GPIO Control Ports | 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) |
Impedance | 2/4/8 Ω |
Input Impedance (Balanced) | 20 kΩ |
Input Sensitivity | 0 dBu / +6 dBu / +7 dBu Selectable |
Intermodulation Distortion (SMPTE) | 0.05 % |
Internal Processing | 2 DSPs (150 MHz, 300 MIPS) |
Maximum Bridged Output 4Ω | 3800 Watts |
Maximum Bridged Output 8Ω | 2900 Watts |
Network Control (IRIS-Net) | Optional with RCM-26 |
Power Consumption | 1000 W |
Power Supply | 100 - 240V, 50 - 60 Hz |
Sample Rate | 48 kHz |
Sample Rate Conversion (SRC) | 32 kHz - 192 kHz, internal Sample-Rate- Converter |
Signal-to-Noise Ratio (A-weighted) | 109 dB |
Slew Rate | 30 V/µs |
Topology | Class-H grounded bridge |
Total Harmonic Distortion | 0.05 % |
Height | 2RU 88.1 mm (3.47") |
Width | 482.6 mm (19") |
Depth | 512 mm (20.16") |
Weight Net | 14.2 kg (31.31 lbs) |