Electro Voice N8000 Dsp Dijital Ses İşlemcisi Network Tabanlı

The product is out of stock.
Fast Shipping
  • Full IRIS-Net supervision, control, and scheduling
  • Comprehensive 32-channel routing and mixing
  • Huge range of DSP filters, EQ, dynamics, and delays
  • FIR-Drive loudspeaker optimization
  • 300 MIPS internal processing
  • Up to 1000 MIPS of processing power available per unit
  • 115 dB dynamic range for clean, quiet sound
  • Internal 48-bit processing for outstanding audio fidelity
  • Auto-compiling DSP engine with ultra-low fixed latency
  • Modular architecture with hardware expansion slots
  • Fully-programmable analog and digital GPIO support
  • Support for Ethernet, RS-232, USB, and CAN
  • CobraNet and Dante audio networking options

 

Audio NetworkCobraNet CM-1 Module (optional)
CAN Bus Interface2 x RJ-45
CoolingLeft-to-right, 3-stage fan
Data Format24 Bit linear A/D and D/A conversion, 48 Bit processing
FIR-DriveYes
GPIO Control Ports2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS)
Network Control (IRIS-Net)Yes
Network InterfaceEthernet-10/100 MBit/s, RJ-45
Power Consumption90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply100 - 240 VAC, 50/60 Hz
Sample Rate48 kHz internal
Serial Interface2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted)115 dB
Total Harmonic Distortion0.01 %
Height2RU 88.1 mm (3.47")
Width483 mm (19.02")
Depth381 mm (15")
Weight Net7.37 kg (16.25 lbs)

 

Similar Products
{x} kişi bu ürünü inceliyor.
Loading...