The GLXD14/WL185 Lavalier Wireless System from Shure includes a GLXD1 bodypack transmitter, a GLXD4 receiver, and a WL185 cardioid lavalier microphone. The system operates on the 2.4GHz ISM band in the Z2 frequency band between 2400 and 2483.5MHz.
Both the GLXD1 transmitter and the GLXD4 receiver feature Shure s LINKFREQ automatic frequency management that allows them to scan for the clearest frequency available and automatically link to each other without any setup required from you besides turning both units on. With their continuous interference monitoring, both the transmitter and receiver automatically switch to the clearest frequencies available to avoid interference and dropouts. The GLXD1 includes a rechargeable battery pack that provides up to 16 hours of operation of a full charge. The system has a 200 range of operation and can be used with 7 other GLX-D systems simultaneously.
A WL185 cardioid lavalier is included for your miking needs. It has a tie clip that can be rotated in 90° intervals for flexibility in placement.
This Bundle Includes:
- GLXD4 Digital Wireless Receiver (Z2 Band: 2400 - 2483.5 MHz)
- GLXD1 Bodypack Transmitter (Z2 Band: 2400 - 2483.5 MHz)
- WL185 Cardioid Lavalier Microphoneü
GLXD4 Receiver : Z2 (2400 / 2483,5 Mhz)
- 2.4 GHz ISM Band
- Z2 Frequency Band
- For Use with GLX-D Wireless Systems
- LINKFREQ Automatic Frequency Management
- Integrated Battery Charge Port
- Continuous Interference Monitoring
- Front-Panel LCD Screen
- Use up to 8 Systems Simultaneously
| Outputs | 1x XLR Output
1x 1/4" (6.35 mm) Output |
| Output Impedance | XLR: 100 Ω
1/4": 100 Ω, 50 Ω unbalanced |
| Maximum Audio Output Level Analog | XLR: 1 dBV (into 600 Ω load)
1/4": 8.5 dBV (into 3 kΩ load) |
| Tuning Frequency Range | 2400 to 2483.5 MHz |
| Range of Operation | 200 (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
| Transmit Mode | Frequency Hopping |
| Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | 120 dB, A-weighted |
| RF Sensitivity | -88 dBm, typical |
| Total Harmonic Distortion | 0.2%, typical |
| RF Output | 10 mW E.I.R.P., maximum |
| Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
| Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
| Pin Configuration | XLR: 1= ground, 2= hot, 3=cold
1/4": Tip= audio, ring= no audio, sleeve= ground |
| Antenna | Impedance: 50 Ω
Type: 1/2 wave sleeve dipole, non-removable
Max Input Level: -20 dBm |
| Power Requirements | 14 to 18 V DC (tip positive with respect to ring), 550 mA |
| Spurious Rejection | >35 dB, typical |
| Gain Adjustment Range | -20 to 40 dB in 1 dB steps |
| Phantom Power Protection | Yes |
| Housing | Molded plastic |
| Dimensions (HxWxD) | 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm) |
| Weight | 10.1 oz (286 g) |
GLXD1 Bodypack Transmitter Features:
- 2.4 GHz ISM Band
- Z2 Frequency Band
- For Use with GLX-D Wireless Systems
- 200 Range of Operation
- TA4M 4-Pin Connector
- Automatic Link with Transmitter
- Includes Rechargeable Battery Pack
- Up to 16 Hours Per Charge
- Metal Construction
| Connector | 1x Unbalanced 4-pin TA4M male mini-connector |
| Tuning Frequency Range | 2400 to 2483.5 MHz |
| Range of Operation | 200 (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
| Transmit Mode | Frequency Hopping |
| Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | 120 dB, A-weighted |
| RF Sensitivity | -88 dBm, typical |
| Total Harmonic Distortion | 0.2%, typical |
| RF Output | 10 mW E.I.R.P, maximum |
| Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
| Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
| Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output |
| Battery Life | Up to 16 hours |
| Power Requirements | 3.7 V Rechargeable Li-Ion |
| Input Impedance | 900 kΩ |
| RF Output | 10 mW E.I.R.P. maximum |
| Maximum Input Level | 1 kHz at 1% THD
8.4 dBV (7.5 Vp-p) |
| Antenna | Internal Monopole |
| Pin Configuration | 1: ground (cable shield)
2: +5 V bias
3: Audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats) |
| Housing | Cast Metal |
| Dimensions (H x W x D) | 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna |
WL185 Lavalier Microphone
| Transducer | Electret Bias |
| Polar Pattern | Cardioid |
| Frequency Response | 50Hz to 17kHz |
| Dynamic Range (Typical) | 102dB |
| Signal-to-Noise Ratio | 18dB SPL (A-weighted) |
| Maximum Input Sound Level | 130dB |
| Power Requirements | Regulated Nominal +5 Vdc (2 Vdc to 10 Vdc) |
| Output Impedance | 28 ohms |
| Output Connectors | TA4-Female |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | Cable length: 4 foot (1.2 meter) |
