L-Acoustics K1-SB Line Array Subwoofer
- 30 Hz LF limit
- Extends K1 or K2 LF resources for special extended modes (throw and contour)
- Yields exceptional tonal balance homogeneity for long throw
- Increased K1 or K2 systems coherence reducing need for stacked subwoofers
- Progressive vents for increased SPL, laminar airflow and minimal turbulence noise
- High power handling, low distortion and thermal power compression
The L-Acoustics K1-SB is a recommended subwoofer complement for the K1 or K2 line sources. Operating down to 30 Hz, it allows augmenting the sub-low resources of the system, by reinforcing then contour or enhancing the throw capability in the low end.
The K1-SB contains two 15" transducers in a bass reflex tuned enclosure. It provides impact, sensitivity, low thermal compression and reduced distortion. The vent features a progressive profile allowing laminar airflow and reduced turbulence noise even at the highest operating levels. These combined properties contribute to the sonic qualities of the SB15m in terms of precision and musicality. The cabinet is made of first grade baltic birch plywood to ensure maximum acoustical and mechanical integrity.
Usable bandwidth (-10dB) | |
Maximum SPL | |
RMS power handling | |
Components | - LF: 2 x 15’’ Neodymium weather-resistant - bass reflex
- Nominal impedance: LF = 4 ohms
|
Connectors | IN: 1 x 4 Speakon |
Rigging | - Captive 4-point rigging system
- Inter-enclosure angles: 0, 1, 2, 3, 4, 5, 7.5, 10°
|
Physical data | - W x H/h x D: 1342 x 505 x 434 mm
- Weight (net): 83 kg / 183 lbs
- Connectors: 2 x 4-point Speakon®
- Material: First grade baltic birch plywood
- Side panels: Die cast aluminum
- Finish: Dark Grey-brown, RAL 9010®
- Protection rating: IP45
- Front: Still grill with anti-corrosion coating Airnet acoustically neutral fabric
- Rigging components: High grade steel with anti-corrosion coating
|