RCF P2110-T Coaxial Hoparlör
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.50” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 10” woofer with a 2.5” voice coil. The cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected. The cabinet is equipped with 12 x M 8 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. The system features a selectable line transformer for 70 - 100 Volt applications. P 2110-T is suitable for indoor and outdoor applications/installations, it meets the requirements of IP 55 code (International Protection Rating).
Features
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- One 10" high-output LF transducer with 2" voice coil
- One RCF Precision Neodymium 1" Compression Driver with 1.5" voice coil
- 90° x 40° constant directivity horn
- Built in passive crossover and selectable line transformer
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- LICC (Low Impedance Compensated Crossover) network
- 12 brass suspension points (M8)
Acoustical Specifications
- Frequency Response -10 dB:95 Hz ÷ 20000 Hz
- Max SPL @ 1m:124 dB
- Horizontal coverage angle:90°
- Vertical coverage angle:40°
- Directivity index; Q:11
- System Sensitivity:95 dB
- Nominal Impedance:16 Ω
- Power Handling:200 W
- Peak Power Handling:800 W
- Recommended Amplifier:400 W
- Protections:Dinamyc
- Crossover frequencies:2000 Hz
Transducers
- Compression Driver:1" HF driver, 1,5" voice coil
- Nominal Impedance:8 Ω
- Input Power Rating:25 W AES
- Sensitivity:106 dB
- Woofer:10" woofer, 2.5" voice coil
- Nominal Impedance:16 Ω
- Input Power Rating:180 W AES
- Sensitivity:95 dB
Input Section
- Input connector:5m, 4-adriges Neopren Kabel
- Constant voltage transformer:70/100
- Power Selection:70V/30W ,15W , 100V/60W, 30W
Cabinet
- Cabinet Material:Polyethylene rotomoulded
- Hardware:12 x M8 inserts+ U-brackets and pair of spacers
- Grille:Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
- Colour:Grey
Physical Specifications
- Height:350 / 13.78 mm/inch
- Width:350 / 13.78 mm/inch
- Depth:320 / 12.60 mm/inch
- Net Weight:13.5 / 29.75 kg/lbs
