| SPECIFICATIONS | WL2082-i | |
|---|
| Configuration | 2 1/2 way, Bi-amp or Tri-amp | |
Transducers
High Frequency
Low Frequency |
Dual 50 W, 8 ohm 1" exit, 1.75" titanium diaphragm, neodymium magnet assembly
Dual 200 W, 16 ohm 8" woofers, 2" voice coils, neodymium magnet assemblies, weather resistant cone | |
| Frequency Response (±3 dB) | 80 Hz - 20 kHz | |
| Frequency Range (-10 dB) | 68 Hz - 22 kHz | |
| Nominal Impedance | HF: 16 ohms
LF bi-amp mode: 8 ohms
LF tri-amp mode: 16 ohms (x2) | |
| Sensitivity (1 W @ 1 m) | HF: 106 dB
LF: 97 dB | |
Continuous Power Capacity 1
| HF: 100 W
LF bi-amp mode: 400 W
LF tri-amp mode: 200 W (x2) | |
| Recommended Power | HF: 200 W
LF bi-amp mode: 800 W
LF tri-amp mode: 400 W (x2) | |
Maximum Output (dB SPL at 1 m)
Continuous / Peak |
HF: 126 dB / 132 dB
LF: 122 dB / 128 dB | |
| Nominal Coverage | Horizontal 140 degrees
Vertical: dependent on number of elements used | |
| Cabinet Type | Ported, elliptical / trapezoidal | |
| Enclosure Material | HIPS (high impact polystyrene) with UV protectant | |
| Finish | Available in black (WL2082-i BLK) or white (WL2082-i WHT) paintable | |
| Grille | Perforated, formed aluminum | |
| Connectors | 2 x NL-8 in parallel | |
| Pin Outs | | Pins | Bi-amp | Tri-amp | | 1+/1- | NC | NC | | 2+/2- | NC | LF2 | | 3+/3- | LF | LF1 | | 4+/4- | HF | HF |
| |
| Attachment Points | Integral, side plate adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10° | |
| Dimensions | 11.8" H x 27" W x 13.4" D
(300 mm x 686 mm x 340 mm) | |
| Weight | 37 lbs (16.8 kg) net
45 lbs (20.45 kg) shipping | |
| Accessories Available | FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.
EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.
PB2082-i: Pullback bar for WL2082-i. For use when pulling back the bottom of the array is necessary to achieve the desired angle. Available in black or white.
AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground stacked configurations. Available in black. Requires two brackets per array, sold individually.
GS115-sw: Ground stack kit for WL118-sw or WL115-sw.
QRP-KIT-1: Kit of four (4) Quick Release Pins for use in lieu of included bolts. |
