The classic – thanks to clip and character.
Character instead of mainstream. Close to the attack, tough, easy to handle: the e 604 has long since been a classic on the rims of tom-toms and snares the world over. Thanks to the practical clip-on holder, the microphone can be mounted in seconds and positioned however you choose. Lightly emphasized in the upper mids and highs, the e 604 provides a forceful sound, open and clear in the lows. The snare receives a warm to dynamic presence; woodwind instruments also receive a marked spaciousness. This is no wonder, since the sound design is based on the legendary MD 421 microphone.
Features
Compact dynamic microphone
Transmits extreme sound pressure levels (over 160dB) without distortion
Impact-resistant fiberglass reinforced housing
Very low structure-borne noise
Extremely simple handling and flexible positioning
Hum compensating coil
Integrated stand mount
| Dimensions | Ø 33 x 59 mm |
|---|
| Connector | XLR-3 |
|---|
| Frequency response (microphone) | 40.....18000 Hz |
|---|
| Transducer principle (Microphone) | dynamic |
|---|
| Weight | Without cable:60 g |
|---|
| Pick-up pattern | cardioid |
|---|
| Sensitivity in free field, no load (1kHz) | 1,8 mV/Pa |
|---|
| Nominal impedance | 350 Ohm |
|---|
| Min. terminating impedance | 1000 Ohm |
|---|
| Weight w/o cable | 60 g |
|---|
What s in the box?
- 1 e 604
- 1 drum clip
- 1 pouch
