Name: Audiocenter MX6200 6x210W / 4 Ohm Power Amfi
Brand: Audiocenter
SKU: Audiocenter MX6200

Audiocenter MX6200 6x210W / 4 Ohm Power Amfi

Barcode: 2242005340592

Brand: Audiocenter

Category: Power Amp 70V/100V

Product Grup: Power Amplifier

Impedance: 4 Ohm

Number of Channels: 6 Kanal

The product is out of stock.

Fast Shipping

6 channel mode, bridge mono (channel-pair) mode
Signal, clip and protect indicators
Front panel input attenuators
Channel inserts for processing
Switchable high pass filter - low frequency roll-off to prevent transformer saturation in distributed systems
Channel 1 split switch - connects channel 1 input to other selected amplifier channels
Input overload limiter - automatically reduces channel gain when steady or excessive clipping is detected
Output overload protection - automatically reduces channel gain when the amplifier senses mismatched loads
Soft startup protection - gradually increases amplifier gain after the amplifier is turned on
Thermal overload protection - activates when excessive heatsink or power transformer temperatures are detected
Short circuit protection - attenuates the signal and disconnects the load
DC voltage offset protection - disconnects output instantly to minimise the risk of speaker damage

20Hz-20kHz 0.1%THD+N
8Ω Power (per channel):	6x140W
4Ω Power (per channel):	6x250W
8Ω Bridge Mono Power:	3x400W
Frequency Response (1W/8Ω):	20Hz-20kHz -1dB/+0.5dB
THD+N (20Hz-20kHz half power):	<0.1%
Power Bandwidth (half power, 1%THD+N):	10Hz-40kHz
Damping Factor (8Ω):	≥250
Intermodulation Distortion (60Hz:7kHz, 4:1 half power):	<0.1%
Channel Separation (vol max):	>60dB
Input Impedance (balanced/unbalanced):	20kΩ/10kΩ
Residual Noise (vol max 12.7kHz LPF):	<-70dB
SN Ratio (12.7kHz LPF):	100dB
Sensitivity (vol max rated power 8Ω):	1.0V
Input Connectors (per channel):	XLR & TRS Combo
Output Connectors (per channel):	Phoenix Terminal
Power Supply (factory configured):	240V 50Hz
Idle Current Draw:	45W
1/8 Power Current Draw (4Ω):	200W
Max Current Draw (4Ω):	1500W
Controls:	Power Switch, Bridge Mode, HPF, Chl 1 Split
Protection Circuits:	DC, Thermal, Input Limiter, Short Circuit, Current Inrush, Soft Startup, Output Overload
Cooling:	2 Speed Fans
LED Indicators (per channel):	Signal/Clip/Protect
Net Weight:	22.0kg
Gross Weight:	27.0kg
Dimensions (W x D x H):	483 x 482 x 132mm (3RU)
Packaging Dimensions (W x D x H):	570 x 625 x 215mm