JBL PRX 835 W 15" 3-yollu 1500W Aktif Kabin Hoparlör 138-dB Wi-Fi

JBL PRX835 15" 3 Yollu 1500 Watt Aktif Kabin Hoparlör, 138 dB, Wi-Fi

FEATURES

• Built-in Wi-Fi for wireless control of your system from anywhere in the venue
• Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound
• Class-leading 1500-watt amplifier delivers ample power to fill your venue
• JBL Differential Drive® transducers for higher SPL in a lightweight design
• Next-generation JBL neodymium compression drivers
• Redesigned Crown input technology, including XLR, 1/4” and RCA inputs plus XLR loop-through
• Intelligent variable-speed fan activates only when needed to reduce noise
• Updated tuning delivers flat frequency response and smooth off-axis behavior
• Integrated 12 x M10 Suspension Points
• Universal power supply for worldwide compatibility
• dbx Type IV™ limiting ensures clear, accurate sound at high volumes
• Brutal testing regimen—including the famous JBL 100-hour power test—ensures reliable performance

APPLICATIONS

• This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. Perfectly capable of reproducing high fidelity full range sound without a subwoofer, when coupled with the extended low frequencies of the PRX818XLFW, complete control over the entire audio spectrum is attained. As with all the full-range PRX800 Series systems, two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
• The PRX835W is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a wide bandwidth with remote Wi-Fi control of onboard DSP EQ parameters. The PRX835W is comprised of one 15 in 275G Differential Drive® woofer, a 165 mm (6.5 in) 196H horn-loaded mid-range and a 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt Audio Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
• All PRX800 cabinets are built from 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. The PRX835 feautres a standard 35mm pole cup that will work with most speaker poles and tripods. All PRX800 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. Each.
• The amplifier input panel offers XLR or ¼ inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level via the level control knob.

 

SPECIFICATIONS

	System Type	Self Powered 15”, three-way, bass-reflex
	Maximum SPL Output	138 dB peak
	Frequency Range (-10 dB):	Normal: 35 Hz – 20 kHz Boost: 34 Hz – 20 kHz
	Frequency Response (±3 dB)	Normal: 42 Hz – 20 kHz Boost: 39 Hz – 20 kHz
	Input Connectors	2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
	Input Impedance	20K Ohms (balanced), 10K Ohms (unbalanced)
	Signal Indicators	Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting  Signal: Green LED indicates signal present  Power: Blue indicates system has power and ready to pass audio.
	EQ	User selectable presets for Normal or Boost, Advanced EQ settings available using Wi-Fi and PRX Connect application.
	Dynamic Control (Input)	dbx Type IV™ limiter circuit
	Crossover Frequency	580 Hz, 2.1 kHz
	Design	Highly efficient Class-D amplifier
	Power Rating	1500W (750W x 2)
	AC Power Input	100V - 240V ~ 50/60 Hz
	LF Driver	1 x JBL 275G 380 mm (15 in) woofer
	MF Driver	1 x JBL 196H 165 mm (6.5 in) horn-loaded midrange transducer
	HF Driver	1 x JBL 2408H-2 37.5 mm (1.5”) annular polymer diaphragm, neodymium compression driver
	Coverage Pattern	90° x 50° nominal
	Directivity Index (DI)	10.5 dB
	Directivity Factor (Q)	11.2
	Enclosure	Trapezoidal, 18 mm, plywood
	Suspension / Mounting	12 M10
	Transport	2 x integrated handles with injection molded backing cup
	Finish	Obsidian DuraFlex™ finish
	Grille	Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
	Dimensions (H x W x D)	938 mm x 446 mm x 539 mm  (36.9 in x 17.5 in x 21.2 in)
	Net Weight	32.38 kg (71.4 lb)
	Gross Weight	38.6 kg (85.0 lb)

15" Boyutunda 3 yollu ve aktif olacaktır. En az 136db güce sahip olacaktır.- Power Rating: 1500 W- Frequency Range (-10 dB): Normal: 35 Hz - 20 kHz- Boost: 34 Hz - 20 kHz- Frequency Response (+/-3 dB): Normal: 42 Hz - 20 kHz- Boost: 39 Hz - 20 kHz- Coverage Pattern: 90* x 50* nominal