AKG C414 XLII MATCH PAIR Condenser Mikrofon For Recording Lead Vocals And Solo İnstruement

The product is out of stock.
Fast Shipping

 

  • Omni, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate pickup patterns
  • Lock Mode disables all controls easily for live and installation use
  • Incredible Dynamic Range of 152 dB
  • Three different bass cut filters and three pre-attenuation levels
  • Peak Hold LED even detects shortest overload peaks
  • Paired using AKGs sophisticated computer-aided matching method
  • Highest possible correlation over the whole frequency range and virtually identical sensitivity
  • Includes carrying case, two windscreens, a stereo bar, and two spider-type shock mounts
  • Frequency range: 20 to 20,000 Hz
  • Sensitivity: 20 mV/Pa (-34 dBV) +/-0.5 dB
  • Max. SPL: 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
  • Equivalent noise level: 6 dB-A (0 dB preattenuation) (IEC 60268-4)
  • Signal/noise ratio: 88 dB
  • Preattenuation pad: 0 dB, -6 dB, -12 dB, -18 dB, switchable
  • Bass cut filter slope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
  • Impedance: <=200 ohms
  • Recommended load impedance: >= 2,200 ohms
  • Supply voltage: 48 V phantom power to DIN/IEC
  • Powering: approximately 4 mA
  • Connector: 3-pin XLR to IEC
  • Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
  • Net weight: 300g (10.6oz.)
  • Requires +48V phantom power to DIN/IEC

 

 

Whats in the BOX ?

  • 2 x C414 XLII Microphones
  • 2 x H85 Universal Shock Mounts
  • 2 x SA60 Stand Adapters
  • 2 x W414 Windscreens
  • 1 x H50 Stereo Bar
  • 1 x Aluminum Carrying Case
  • 1 x Measurement Documents
Similar Products
{x} kişi bu ürünü inceliyor.
Loading...