Electro Voice PA-4150L Power Amfi 4X150W/4Ohm

The product is out of stock.
Fast Shipping
  • Flexible multi-channel power for installation
  • Ideal for sound reinforcement, paging, and life safety
  • 150 W per channel into 4 Ω
  • Bridged mode for dual 315 W outputs into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting

 

Amplifier Gain30 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω160 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω150 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω75 Watts
Crosstalk< < -75 dB ref. 1kHz, @ 10% rated output power
DIM 30< 0.1 %
Frequency Response< 10Hz - 40kHz -1dB, ref. 1kHz
Impedance4/8 Ω
Input Impedance (Balanced)> 20 kΩ
Input Sensitivity0 dBu (775mV) @ rated output power or voltage, 1kHz
Intermodulation Distortion (SMPTE)< 0.1 %
Network Control (IRIS-Net)No
Number of Channels4
Rated output power (*rated load) THD< 0.2%, 20Hz – 20kHz150/75 W 4Ω/8Ω
Rated output power (*rated load) THD< 1%, 1kHz160/100 W 4Ω/8Ω
Signal-to-Noise Ratio (A-weighted)101 dB
Slew Rate16 V/µs
Total Harmonic Distortion< 0.1 %
Height2RU 88 mm (3.46")
Width483 mm (19.02")
Depth406 mm (15.98")
Weight Net18 kg (39.68 lbs)

 

Similar Products
{x} kişi bu ürünü inceliyor.
Loading...