Shure Beta 58A
The Shure Beta 58A dynamic vocal microphone is precision-engineered for professional live sound reinforcement and studio recording
applications. A tailored frequency response accentuates clarity of vocals and a tight supercardioid pattern insures high gain-before-feedback,
maximum isolation from other sound sources and minimum off-axis tone coloration.
- Frequency responseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up. tailored for vocals, with brightened midrange and bass rolloff to control proximity effectWith a directional mic, more bass is added when the mic is closer to the sound source.Read moreGo to the glossary
- Uniform supercardioidPicks up most sound in front of the microphone and very little from the sides, making it more directional than a cardioid mic. pattern for high gain before feedbackSustained howl when a mic hears a loudspeaker already reproducing that mic s sound. and superior rejection of off–axis sound
- Neodymium magnet for high signal–to–noise output
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Minimally effected by varying load impedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.
- Legendary Shure quality and reliability
Cartridge Type | Dynamic (moving coil) |
Frequency Response | 50 to 16,000 Hz |
Polar Pattern | Supercardioid |
Output Impedance | 150 ohms |
Sensitivity (at 1kHz, open circuit voltage) | −51 dBV/Pa (2.8 mV) 1 Pascal=94 dB SPL |
Weight | Net: 0.278 kg (0.62 lbs) |
Connector | Three-pin professional audio (XLR), male |